if i cancel this oil valve?
Collapse
X
-
not shure about this... but you may not got oil for the camshaft in head.... and the oil does controlled by 2 sencors.... i wil use this valve in the oilfiltehousing.... for safety..( with locktite or permabond on the threads... ( medium) -
Be careful. I know it's to stop drain down of oil from the head when the engine is off, but it could also restrict/control oil flow at higher RPM to stop overfilling the head. I'm sure there are plenty of experts here that will chip in.Comment
-
Thought it was just a pressure regulator for the oil pressure sensor, it is the one that sits behind the cotton reel type looking sensor rightComment
-
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avantComment
-
As said it's check valve to ensure the oil feed in the head isn't draining empty. But it can also be acting as a restrictor so the head isn't flooding, and to keep up the pressure to the crank bearings. Just my thoughts...
Edit.
5cylinderman had the same thoughts.Last edited by Thuppu; 11 October 2014, 17:11.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - ProjectComment
-
it is answer for me thanks everybody
Comment



Comment