So, have you got vacuum on thatr hose now then??
-
-
No John I could not get up and under the dash to see how the green line routes. Bad back. So I left that to my much younger , and there for more agile son. In the end he could not come round to help until today. That's why I done all the other jobs Which I
Could do standing up. No fun getting old.Comment
-
Finaly Got the car to run right, but not sure how.
I found that that the pancake valve on the PCV pluming was faceing the wrong way so changed that. Ran a vac hose from the inlet direct to the ecu to see if it made a differance, It didnt.
Done an out put test.and couldnt get the n75 to click. When I tested it of the car I found it worked ok. refitted it, and cable tied it away from the exhaust.
I also found the line to the wastgate had a couple of cracks at both ends. I trimed and refitted theses. Tightened all the hose clips. fitted new plugs, and air filter and it has fixed it.
However I still dont seem to get the same consitant boost I got when Dimitri mapped it.
I am hoping he will have another go when he is next over
Thanks for all the help,and advise
Comment
Comment