Stroker

[strokerrules]

I have all the parts to build me a stroker, accept the front harmonic damper. What damper do i use for an stroker? The diesel damper, the pertol damper? Can you stroker guys give me a pointer???

[rxl]

i will use aby/adu damper.

[AndyP]

I used a 3B damper on mine.

[rxl]

I think It depends on what climate compressor and generator you will be using

[sailaz]

first of all it depends into which car you are planning to put this stroker. Then you need to know which auxiliaries you're going to use, and depending in sum of everything you can choose damper and brackets for auxiliaries accordingly .

[strokerrules]

Tought, i would use an AAN for more space for ic.
basically You could use any damper you like?? Right?

[rxl]

Aan aby 3b all will do

[sailaz]

Tought, i would use an AAN for more space for ic.
basically You could use any damper you like?? Right?

is it the secret into which car you gonna put this AAN ? as I already posted depending on pulley you will need all brackets for your auxiliaries from the same engine as your pulle, and yes, you will gain more space for IC with AAN pulley because it uses one belt for all auxiliaries and all are shifted a little bit back which can cause some other fitment issues.