Diameter of the black plastic pipe from IC to TB?

[Jonas_R]

Can anybody tell me in [mm] what the diamter is of the black pipe?

In my car this pipe is replace by to aluminium pipes see picture



I need to replace this black piece of hose with a blue samco. The IC to plastic pipe hose is the same, so my aluminium pipe should be same diameter as the plastic pipe.
So can anyone tell me what the diamter is?
Do not have anything i can meassure with right now and it is snowing like hell.

/Jonas R.

[4WheelDrifter]

60mm ID

[Jonas_R]

Thx alot, so i guess i should get a 60mm samco hose then right?

/Jonas R.

[4WheelDrifter]

The metal pipe is 61mm so I think a 60mm Samco staight connector will be ok.

[s2_southwest]

SFS do a 63mm ID silicon pipe if thats any help. Im going to replace mine too

[4WheelDrifter]

63mm sounds a bit on the baggy side.

[s2_southwest]

true, but the ally pipe i used to join the air filter so some pipes were slightly oversize as i couldnt get a larger diameter ally pipe and its amazing how much they squeeze up, but im sure 60 will be fine, have you done it yet jonas?

[Jonas_R]

true, but the ally pipe i used to join the air filter so some pipes were slightly oversize as i couldnt get a larger diameter ally pipe and its amazing how much they squeeze up, but im sure 60 will be fine, have you done it yet jonas?

No have not done it yet. Thought i would get something to meassure the diameter with of the pipe just to be sure. And then call our local samco specialist and get the hose + a 70-60 reduction hose.

/Jonas R.

[s2_southwest]

im gonna do mine soon so when i do i'll let you know if you havnt already done it