Idle problems with vems

[nip]

As Alex says, there is a resistance value that should be checked to make sure the throttle position switch is also set in the correct position

How? What do I have to do

[Tonks4x4]

Have a read here....

http://www.sjmautotechnik.com/trouble_shooting/20vthrot.html

Sent from my iPhone using Tapatalk

[nip]

Have a read here....

http://www.sjmautotechnik.com/trouble_shooting/20vthrot.html

Sent from my iPhone using Tapatalk

Thanks Brian I will check tomorrow I'm trying to post the latest log

[nip]

it wont let me post it up

[nip]

Tried the Tps reading today on idle it was about 1500 instead of 1000 do tried. Different throttle body and hey presto!!! It now idles at 850 took it for a drive drives as good thanks for the input guys

[A80Avant]

So was it the potentiometer? Did you calibrate the new one?

[nip]

So was it the potentiometer? Did you calibrate the new one?

The body is self I think, I did notice the throttle has easy movement unlike the old one I would have said the flap was stiff and the throttle stayed open slightly

[nip]

Yep I did mate 👍🏽

[A80Avant]

I mean the calibration of the TPS in vems

[nip]

I mean the calibration of the TPS in vems

Yep I did that too