Best place to get 800 to 1000 cc injectors

[blackS2]

I'm using EV14 980cc from finjector running at 3.8 bar in my S2.

Perfect idle and no issues...

I calibrated them also in another S2 with 2xEV14 980cc per cylinder (10x980cc) at 3.5 bar

also no issues...

I calibrated them also in RS4 at 4.0 bar

also no issues...

I like these...

[Thuppu]

Take the 1200cc EV14. Good place to buy finjector or ebay/fiveo. I would have a set of 1200cc on the shelf but I'm not sure if I wan't to sell them.

[diesel des]

Take the 1200cc EV14. Good place to buy finjector or ebay/fiveo. I would have a set of 1200cc on the shelf but I'm not sure if I wan't to sell them.

Pm sent LOL

Sent from my HTC Desire HD A9191 using Tapatalk 2

[diesel des]

Something like this

http://www.finjector.com/verkkokaupp...iew/533081/187

What dimensions do we need in a stock fuel rail. 14mm and 61mm between seals?

Sent from my HTC Desire HD A9191 using Tapatalk 2

[blackS2]

Something like this

http://www.finjector.com/verkkokaupp...iew/533081/187

What dimensions do we need in a stock fuel rail. 14mm and 61mm between seals?

Sent from my HTC Desire HD A9191 using Tapatalk 2

yes

[diesel des]

Anyone want to confirm this injector will fit ok. Correct sizes and jetronic plug.

http://www.finjector.com/verkkokaupp...-p-450775-187/

Sent from my HTC Desire HD A9191 using Tapatalk 2

[popdemonic]

TJ: i have Deka 850cc on my car. they're nicely on idle but just curious if anyone has the appropriate injectors deadtime on this injectors?
i also run 850cc on 5bar FPR.

[Error404]

Des email Marko at Finjector he will advise on what you are best to use

[Thuppu]

Anyone want to confirm this injector will fit ok. Correct sizes and jetronic plug.

http://www.finjector.com/verkkokaupp...-p-450775-187/

Sent from my HTC Desire HD A9191 using Tapatalk 2

Des, O-O 61mm is perfect fit. I think they make longer 1200cc EV14 so you wouldn't need to use double adapters. http://www.finjector.com/verkkokaupp...-p-533081-187/

[diesel des]

Des, O-O 61mm is perfect fit. I think they make longer 1200cc EV14 so you wouldn't need to use double adapters. http://www.finjector.com/verkkokaupp...-p-533081-187/

The ones you linked have different connectors I think? Are ours jetronic?

Sent from my HTC Desire HD A9191 using Tapatalk 2

[Thuppu]

Ooh yes, you'r right. I had adapters on mine. Didn't see that you link EV14's had different connectors.

[blackS2]

[diesel des]

Black s2 they look nice. What version are they?

Sent from my HTC Desire HD A9191 using Tapatalk 2

[blackS2]

Black s2 they look nice. What version are they?

Sent from my HTC Desire HD A9191 using Tapatalk 2

Order contents:
EV14, Bosch, 957 CC ,12 ohm, C30°, Jet -liitin, pitkä kärki, O-O 34 mm (0280158040)

Suuttimen jatkoholkkisarja14 mm bensakiskolle, sis. tiiviste ja kiinnitysklippi (TOP14-CLIP)

Suuttimen alaosan MUSTA jatkoholkki pitkäkärkisille suuttimille, sis. 14 mm tiivisteen. Peittää suutinkärjen ja jatkaa O-rengasvälin seuraavaan pituusluokkaan. (BOTTOM-SET-2)

[rst]

I have had these for the past 5 years.
Five o injectors

I have 4 bar fuel pressure and mine idles ok with petrol. I have also used these with ethanol over the past 5 years on drag strips. No problems with them.
I had Siemens 850cc but after using them for about 6 months, i got idling problems like many others. So i would not suggest using Siemens Deks injectors.

Bosch EV14 1000/1200cc is a safe bet.