9a vs ACE 2,016v

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • fish
    replied
    Cheers mate, thanks for the offer whats it off?

    Leave a comment:


  • newsh
    replied
    I can send you this for the hall sensor if you like, been in my shed for about 25 years, clean as a whistle inside [emoji106]

    Leave a comment:


  • fish
    replied
    Thanks mate, so its a HKZ 101 im after. Cheers

    Leave a comment:


  • UrS4boy
    replied
    *IF* you read through my DIY link you would know what the actual Hall sender is and how to replace it (2 rivets and three wires) once you have the distributor disassembled (same amount of work to replace the OE Hall sender plate).

    Google "HKZ 101" to find local sales points or go to EFI Express:

    EFI Motorsport is a company dedicated to providing quality upgrade parts, hardware, software, tuning, and service for a range of European vehicles.


    Leave a comment:


  • fish
    replied
    No, i am not whining The issue for me is that i need this car working NOW as it's my only car. And where i live parts for these are not readily available, and if i order a part off ebay for exemple i normaly have to wait ca two weeks for it to arrive du to the swedish customs/postal service being rubbish. Thats why i keep asking what could and could not fit. The senders that Newsh kindly liked in, are they generic senders? If so, could i take any three wire sender from any 4cyl vag dizzy?

    Leave a comment:


  • UrS4boy
    replied
    Originally posted by fish
    How unusual that parts are not available... :/
    Dude: The cars are more than 20 years old. Parts are going to go NLA. Prepare for that by buying up critical spares and/or figure out work-arounds. You have been given DIY instructions as how to replace a $10 Hall sender in a distributor. Either find a good used distributor with a working Hall sender or spend the $10 as use the DIY instructions. Done.

    Anything more and you are just whining.

    Get on with it.

    Leave a comment:


  • fish
    replied
    How unusual that parts are not available... :/

    Leave a comment:


  • JariP
    replied
    As far as I can remember there were no usefull part numbers in it. Or the parts were not available anymore.

    Leave a comment:


  • fish
    replied
    Any part nr,s on it mate?

    Leave a comment:


  • JariP
    replied
    This is the hall sender from my Competition.
    Attached Files

    Leave a comment:


  • fish
    replied
    Dave, is the distributor the same on the ACE as on the V8? As in the V8 has two?

    Leave a comment:


  • newsh
    replied
    Search this ... Ignition Pulse Sensor audi 80

    http://www.ebay.co.uk/sch/i.html?_fr...udi+80&_sop=15

    Leave a comment:


  • newsh
    replied
    I reckon the sensor from any of the same era as long as it's got wires

    This came up on a search for the 7A part number, check the compatibility listings

    http://www.ebay.co.uk/itm/STANDARD-I...gAAOSwv0tU7jwk

    Leave a comment:


  • fish
    replied
    Or could i just take any sensor from a golf, Audi, of same vintage as mine?

    Leave a comment:


  • fish
    replied
    Damn, your faster than me

    Leave a comment:

Working...