wastegates rotorboy is selling a complete wastegate afaik
-
Greg
S2Forum.com Administrator & Webmaster
'93 Coupe with a few tweeks
-
I've thhe same problem
after some search found this: http://www.atpturbo.com/Merchant2/me...egory_Code=WGT
Do you now if it could be a straight swap or how much modification.
I've mail them about distance of the flange four holes
I'm waiting for answerRS2 chip by mihnea,PKM short IM, forge dump valve, 3" custom stainless exhaust, 18"X8" Porsche 996 rims, conti contact 245/35 Front 225/40 Rear, QR sport top mount, Powerflex bushes, aloy sub frame bushes, neuspeed 19mm RARB,Hard tranny mount, V8 torsen on RS2Comment
-
looks like an expensive way around the problem to me. do a search on ebay there is usually a few on there.
GregGreg
S2Forum.com Administrator & Webmaster
'93 Coupe with a few tweeksComment
-
I don't think it 's so expansive 400$ so about 300€ plus you are sure it's not leaking
because on e bay you might get a leaking one again.
and if you compare to AUDI one that is about 1200€ then very cheapRS2 chip by mihnea,PKM short IM, forge dump valve, 3" custom stainless exhaust, 18"X8" Porsche 996 rims, conti contact 245/35 Front 225/40 Rear, QR sport top mount, Powerflex bushes, aloy sub frame bushes, neuspeed 19mm RARB,Hard tranny mount, V8 torsen on RS2Comment
-
true, but you can get them off of ebay for £50 and more than likely have no probs at all
GregGreg
S2Forum.com Administrator & Webmaster
'93 Coupe with a few tweeksComment
-
formally RS2 +Comment
-
Where can i find this Ring that sits there where the valve underside of the wastegate is.Go Holset or Go RS4Comment
Comment