Turbo boost.......problems

[mike74]

Sounds very promising, good on you for persevering for so long

[newsh]

How did you cure it?

[wastegates]

Hi friends, first to thank all those who have been giving me advice to review the S2, have been a pile of things that have been happening while we were dismantling ............... solved a Fault and another came out as you can check in the post.

Before I said that I would put the photo of the last fault after loosening the catalysts this morning to check that they were not plugged (I have 2 sets of catalysts) .................. .............. desperate and for the very last time after having solved countless air leaks, I have again made a pressure test and ............. Again another leak ........................ but how is it possible? If I've done at least 10 pressure tests in the last few weeks.

Well again yet, and by the end it works quite well, today I have seen 1.45 bar

In the photo you see the Diverter 710 N, I usually have the Forge installed, but I already suspect everything and I have been changing it to check the name of it.

[wastegates]

Thanks to everyone, I hope this post serves someone to solve problems.