Cam position sensor

[Harris1]

Help please does anyone know how many ohms the cam position sensor should be
(ABY)

Thanks

[johne]

It's not an "ohms" sensor, it's a Hall effect sensor so knowing it's resistance doesn't really help. If you're looking for help troubleshooting the sensor, there's lots of posts on here.

John

[Harris1]

Thank you I will have a search
I parked the car up 2 months ago and all was well then yesterday I went to start it and was flat I then replaced the battery but still will not start turns over fine
Fuel pumps relay is ok
Fuel pump ok

Suspect injectors ???

Cheers

[johne]

Injectors are bullet proof unless a mouse has eaten the wiring and anyway if one's failed you've still got 4 left to start the car


John

[Harris1]

Sorry
What I meant was when I say injectors is the Ecu is not grounding / earthing the injectors and I believe the the ecu picks the injector sequence from the G4 and the g40 sensors
???
Cheers

[LHD_Kid]

Sorry
What I meant was when I say injectors is the Ecu is not grounding / earthing the injectors and I believe the the ecu picks the injector sequence from the G4 and the g40 sensors
???
Cheers

Rather than just "guessing", have a read through This

[piotr]

Can you read codes?

[Harris1]

Will get the diagnostic kit from work next week and have a look going to have another play after F1

Cheers

[UrS4boy]

G40 Cam Shaft Position Sensor Info

G40 Cam Shaft Position Sensor Info:

http://forums.quattroworld.com/s4s6/msgs/22580.phtml