S2 vs RS2 grille question..

[AndersS2]

Hi.

i have the rs2 grille on and some want it bad, and as i am coverting back to OEM grille style i can sell it.
BUT, what is the diffrence on these to in mounting? is it just to unscrew the rs2 grille and clips on the s2 grille?
I noticed there was some holes back on the s2 grille but not on the rs2 one?!

i can always damage the thing by myself but that would be stupid to do that and not to ask you guys first. (yes i know this isnt level 5 hard work to do)

That i'm trying to say is, do i need the same clips for the s2 grill as for the rs2?

cheers,

Anders

[Nuvo]

The quick answer is no you dont need the clips for the S2 grille, you need 6 bolts, washers and clamping plates to hold the original grill in place. What are you reverting back to the original?

HTH,
Nuvo.

[AndersS2]

The quick answer is no you dont need the clips for the S2 grille, you need 6 bolts, washers and clamping plates to hold the original grill in place. What are you reverting back to the original?

HTH,
Nuvo.

i'm going back to OEM. i like the OEM grille much more than the rs2 one (cause everyone has the rs2 grille )
Ok, then i must get these on the pic?

[Nuvo]

Hi Anders,

Fair point. I've got and RS2 grille myself. No, you need the parts numbered 2,3,4 and 5.

Nuvo.

[AndersS2]

Ok! thanks Nuvo!



Cheers,

Anders

[Fat Audi 80]

The OEM grill is a lot nicer than the RS2 one...

[AndersS2]

The OEM grill is a lot nicer than the RS2 one...

haha! i was wondering when you'd show up in this thread
But i agree your opinion!

OEM will fight it's way back on top!

[rotoryboy]

The OEM grill is a lot nicer than the RS2 one...

Oh God, don't start him off

[quattro_king]

to say it gently

WTF is a oem grill?

[Ski]

OEM = original

[Skull]

there are two tipes of oem grilles. the older is shown in the etka pic, that has carriers also on the top of it. the newer ones just snap in at the top, and screws at the bottom. the change was made y. 94 i think.

anders: how much for the rs2 grille?

[AndersS2]

there are two tipes of oem grilles. the older is shown in the etka pic, that has carriers also on the top of it. the newer ones just snap in at the top, and screws at the bottom. the change was made y. 94 i think.

anders: how much for the rs2 grille?

Mines a late 93, and the grille has holes both on the upside and the downside of the grille. so then it must be the old one

I currently have a bid on 125,- € so beat that if you want it.
it's painted blue in the list though..

cheers,

[rs2coupe]

Mines a late 93, and the grille has holes both on the upside and the downside of the grille. so then it must be the old one

I currently have a bid on 125,- € so beat that if you want it.
it's painted blue in the list though..

cheers,

Damn too bad it's painted...

[Skull]

Anders: if you have 6 holes, you need numbers 15,16,17. 15 is what holds the grille on, 16 and 17 is the screw and the metal ring for which i dont know the engilsh translation.

[AndersS2]

Anders: if you have 6 holes, you need numbers 15,16,17. 15 is what holds the grille on, 16 and 17 is the screw and the metal ring for which i dont know the engilsh translation.

No, i got 7 holes! 3 on top and 4 in the bottom.

so i orderd 15,16 and 17 x 3
and 2,3,4 and 5 x 4

So lets hope that does the trick!
can't wait to get the OEM grille on!

Oem is the new "bling"