Help! Central locking servo (slave cylinder?) for boot needed

[Animal Mother]

Found the diaphragm in the servo/slave cylinder of the boot central locking unit perforated.
I need to replace the whole unit as I had to destroy it to check it out.
Can anyone help.
I think part number is 4A9 862 153A but doesn't seem right to me.

[Animal Mother]

Anyone? Someone must have one lying around.

[newsh]

Have you got a pic of it? I have a couple from the doors which might work.

[Animal Mother]

Here you go. Ebay didn't come up with anything.

[newsh]

Ok found these, they're different but maybe you could use the diaphagm from one.

[Animal Mother]

Ok found these, they're different but maybe you could use the diaphagm from one.

Cheers for the offer but my one was non-repairable as you have to break it to open and check for faults. I'm sure someone on here has something like it.

I can change the rod on a new one but the body can't be opened.

[Animal Mother]

Ok found these, they're different but maybe you could use the diaphagm from one.

I reckon I could reclose my unit with a pair of hose clamps in order to make it airtight again.
Will try and give your unit a go if thats ok?

[newsh]

Bu66er, just put them back in the garage roof.

You can have one of these to play with, if you file the teeth off those little bits that hold it together it'll probably come apart without breaking.