Known good windscreen fitters / centres

[Error404]

Hopefully this might be a useful sticky as the coupe windscreen replacement is a minefield and lottery where more people than not have problems.

Can anyone with a good experience please post with details of fitter (if possible), fitting centres and location?

Cheers
Alex

[Jamo]

Search for Rotoryboy post on the subject, think the best one in the midlands is Coventry autoglass

[jameswkr]

Old School windscreens based in Chertsey Surrey. See website for more details. Recommended.

[Christophski]

How about near Hemel and Watford in Hertfordshire? I have an avant that I don't want messed up!

[GazzaG60]

autoglass oldham ask for simon to fit it. just dont spend a night out in town.

he knows whats what.

think you can throw an avant one in from 5 paces by the sounds of things

[GazzaG60]

Ask for an audi glass only. it is a different shape. the pilkington looks wrong and is.

[Fat Audi 80]

RAC Windscreens In Oxford. Not sure of fitters name but he was the supervisor with the most experience.

8/10 IMO.

Cheers,

Steve

[Jamo]

How about near Hemel and Watford in Hertfordshire? I have an avant that I don't want messed up!

Avants aren't a problem, they aren't riveted like a Coupe and are easy in comparison

[Christophski]

Sweet! I think my seal along the bottom edge has sen better days and may b leaking

[re2500]

Can anyone recommend a good fitter in the south west/ Wales my car just failed MOT because of a fine 40mm crack on the passenger side that I'd never noticed.
Probably a blessing actually thee seal on the bottom of my windscreen has seen better days, probably causing my footwell puddle and the screen is slightly delaminated at the edges.

[re2500]

Oh carp!! Just been reading more threads on this, sounds like I'm going to have a real challenge getting this done properly!

[bluequattro]

Urs4 avant needs one so Alex if u know a good local mobile fitter please let me know!

[Rusty]

Oh carp!! Just been reading more threads on this, sounds like I'm going to have a real challenge getting this done properly!

Remove and re-fit the side trims yourself - no messing about then

[terrybullwon]

To be honest its very easy dont believe all the scary posts you have read.

Like Andy said remove all the trim and rivits your self and all the fitter will need to do is bond the screen in

[re2500]

Cheers guys! Having not looked at it properly yet. Where are these infamous rivets? Are they plastic/aluminium. Do they require drilling. Is it advisable to replace with new ones.
Tbh this is all assuming that if the screen has been replaced before (likely) that it was done well before lol