S2 with no headlamp washers

[re2500]

I much prefer V6 bumper over s2, but i think an s2 bumper with rs2 style washers could be cool. Like AndyP said im sure you could get some generic washers. like fit some round bonnet-> windscreen washers in the top of the bumper. That could work?

[rj scotty]

I really can't decide

As I only have one of the washers Ill keep a look out for the another one and go washer-less for the time being.

This is where I am currently

[Le S2 Audi]

My coupe never had washers but it could have been replaced too. Someone should stick up a nice pic of one with washers for comparo

Are those tints dark enough

Its how i bought the car, allthough the pic is a little dark all over as well, but they really are black, looks but doubt its legal :mischeif:

[Nero]

Mine S2 had a V6 bumper on it when it came from Luxembourg.

I noticed that the grilles at the bottom of the bumper weren't as open as original S2 grilles. The ducting of the oil cooler was completely blocked.

[sam80quattro]

my b4 quattro saloon 16v had washers on the standard **** bumper, porsche 944 1s look the same as rs2

[newsh]

My coupe never had washers but it could have been replaced too. Someone should stick up a nice pic of one with washers for comparo

[hibby]

Really, I'm 99% sure all V6 Coupés should have the same 'S2 type' front bumper. I know V6 Avants/saloons have a different one's.

Yeah I was thiniking of the saloons and avants though they do come on some of the avants dont they?

I have a v6 coupe with normal bumper, but it could have been replaced at some point.

[K Simmonds]

I am sure you all know this but just incase, not all the v6's had the same bumper.

Really, I'm 99% sure all V6 Coupés should have the same 'S2 type' front bumper. I know V6 Avants/saloons have a different one's.

[K Simmonds]

If thats the case could you fit a V6 bumbper and retro fit the RS2 washers?

So you could get the best of both worlds!!

Yes, that would be a good option. Just the cost off genuine RS2 headlight washers is silly, I'm sure there must be similar but reasonably priced alternatives.

[speeding-g60]

wink wink, nudge nudge... to bad mine just got painted today...

hahahahaha

[hibby]

The V6 and S2 bumpers are identical, only all S2's had headlight washers. They were a fairly unpopular 'option' on other models. Coupe wise, I've seen a couple of V6's with them and a couple of 10/20 valves with them fitted.

I've also spotted them on the odd V6 Saloon/Avant.

I am sure you all know this but just incase, not all the v6's had the same bumper.

[Le S2 Audi]

The V6 and S2 bumpers are identical, only all S2's had headlight washers. They were a fairly unpopular 'option' on other models. Coupe wise, I've seen a couple of V6's with them and a couple of 10/20 valves with them fitted.

I've also spotted them on the odd V6 Saloon/Avant.

If thats the case could you fit a V6 bumbper and retro fit the RS2 washers?

So you could get the best of both worlds!!

[K Simmonds]

The V6 and S2 bumpers are identical, only all S2's had headlight washers. They were a fairly unpopular 'option' on other models. Coupe wise, I've seen a couple of V6's with them and a couple of 10/20 valves with them fitted.

I've also spotted them on the odd V6 Saloon/Avant.

[Le S2 Audi]

Huuummmm....

Jury is out for me... I like both options...

With Cos

1st, that's what make's the car stand out as an S2...
2nd, I run with HID's as from another thread I've read you "Should" have washers when HID's are fitted!!

Without

Like the smooth lines....

Question...

Running with the smooth bumper, does this effect the air flow to the intercooler thingy behind the bumper, is that not one of the reasons that Audi changed the bumper in the 1st inst???