This is daft, I had a problem with the door, the central locking wasn't being triggered when locking the car, so I pulled the door card and checked inside, sure enough the vacuum actuator in the bottom of the door wasn't connected to the rod, the retaining collar had dropped down. I swapped in a spare actuator and buttoned it all back up. All pleased with myself, I got in the car and shut the door and found I couldn't get out, the inside door handle wasn't working. Climb out passenger side and it opens fine from outside the car. Pulled it all apart again to check cable position etc. and it all looks ok but it's as if the cable is too long The cable is not pulling the catch far enough to release it..
What have I done??
What have I done??
Comment