Coupe carbon B pillar cover fitting

[Rusty]

Do you need to remove the existing B pillar trims to do this? I just went to have a look and there isn't enough room between the gutter trim and B pillar trim to fit the carbon in... can't see that it's supposed to butt against the pillar trim

[s2driveruk]

Yeah, they are replacements as far as i know....look great too!

[Rusty]

They're covers mate. Ended up removing the B pillar trim and getting one side on there today. Will re-do it when I do the other side, as I've learned a bit from today. I'll write up a how to when I do it, as it may help others.

[Monkeymagic]

Don't need to remove trim they just about slide under the rubber and the trim across the top. One of mine wouldn't quite sit right so used some sikaflex and bobs your fathers brother

[Rusty]

I think my trim had been refitted as it was totally flush. Not hard to remove and could clean up the OE cover, as it was corroded a bit.

[Rusty]

All done. Write-up here.