RS2 inner fender covers / wheel well liner

[Tzummie]

My inner fenders (the plastic wheel well liner/cover) have different cracks in them. Does anyone know if there's a replacement for this? Audi doesn't have them since 2007, on eBay there are some offerings on new, but seem to generic ("Audi 80 > 1991").

The ones of the RS2 are the same as the 80/90/avant quattro. 8A0 810 171/172 B
The 80 ones are 8A0 810 171 (without the "B").

T.

[UrS4boy]

The ones of the RS2 are the same as the 80/90/avant quattro. 8A0 810 171/172 B The 80 ones are 8A0 810 171 (without the "B").
T.

The 8A0810171B = Audi 80 Q (sedan and avant) 1992 to 1995, and the RS2s, left rear.

The right rear came as 8A0810172B but also as 8A0810172A for earlier A80Qs.

Hope that helps.

[shaun5]

Im sure me, andyg plym, or acidburn will have these I'll look when im next with all my parts

[Tzummie]

thanks. The problem with these plastic parts is that they become brittle, especially on the edges that are exposed to sun. I've seen new ones on eBay for (relative) little money, but am unsure what the quality or fitting is with these..

[Tzummie]

looks like the offerings on eBay don't fit.. (want to stay OEM anyway..). so, looking for the real liners..

[epic]

Just buy new from dealer for little money. That's what i did

[Tzummie]

@ epci: What part number did you order then? For an RS2?
thnx.

[epic]

[Tzummie]

thanks. When did you buy yours?

[Canadian RS2]

The 8A0810171B = Audi 80 Q (sedan and avant) 1992 to 1995, and the RS2s, left rear.

The right rear came as 8A0810172B but also as 8A0810172A for earlier A80Qs.

Hope that helps.

Hey Dave, So the Audi 90 Quattro's in our neck of the woods should have the same part number? I could use a new set for mine.

Dave t

[UrS4boy]

Hey Dave, So the Audi 90 Quattro's in our neck of the woods should have the same part number? I could use a new set for mine. Dave t

"New" is a difficult word. 8A0810171B and 172B are NAmerica Audi 90 PNs. However, they are both NLA in NAmerica based on a check of GVAP:

http://genuineaudiparts.com/parts/in...&siteid=214407

[epic]

6 months ago

thanks. When did you buy yours?

[veneto rs2]

Just fitted a wheel well liner rear left coded 8A0810171 on my RS2.

I can confirm that it does fit as long as you cut a wider window on the suspension opening and you trim the front side where it goes under the peculiar RS2 skirts.
I'm talking about one/one an half inch cuts nothing major.
Best to look at the opposite one and make yourself an idea where and how much to cut it.
Apart that everything matches including all the screws holes positions.

Stefano

[Tzummie]

thanks! But which model / part nr. are you talking about? What letter is on the end of the code?

[bluequattro]

I have a s2 avant set for sale