RS6/RS4 style grille mesh??

[Henka]

Geez.. Now - so no one has seen this style mesh even for a ricer-racer (hot wok jap "car") ?

[AAH!]

I would be very grateful if someone could tell me if the "inner" four ring emblem in black is available for the RS2 grille. You know, the bit in the picture above that shows just underneath the chrome rings (mine is missing, don't ask:{)

graham.

It comes as a single piece. The silver rings are fixed to the black "inner" rings, although you can pull them apart...sort of.

I did this when i went through a phase of spraying the silver rings black.


angus

[Henka]

Well I found it...Only it's in the US and it's not really cheap. I'll look into it further more though!

Search for product ID 9305T46 and press Find!

McMaster-Carr

[rs2coupe]

Well I found it...Only it's in the US and it's not really cheap. I'll look into it further more though!

Search for product ID 9305T46 and press Find!

McMaster-Carr

Any more info on this?

[|Maku|]

Not quite RS4/RS6 mesh, but this is my version.

[A80Avant]

rs4 mesh goes nice with the rs2. Initially i was looking for something like that maku,but now i can say that the one i ended up with is better to my eyes

[Error404]

That looks sweet Vas

Where did you get it from / how did you fix it mate

[A80Avant]

The bottom one is original RS4 grill. I bought 2 of them and cut one of them to fit. The middle one is held on mostly with tireups.

the top one i got from a shop in Canada which had really primitive way of payment methods so i asked a friend of mine from canada to do the payment and i sent him the amounts through paypal. It wasnt cheap with all shipping costs but it turned out to be brilliant.

the hood mesh was fixed into place with the normal rs2 clips. it is not that thick so those worked fine. I only had to drill some holes(good old swiss army knife) so that the audi rings can be fitted

i cannot recall the name of that canadian shop but i will look it up(i must have posted this before on the forum)

[s2_bo]

I like the look of that too!! Wheres it from

[rs2coupe]

Yep I agree,... the match is good Vas. Yours looks good too Maku!

[monstereddie]

i have this as a plug and play set.
i installed this on my front bumper yesterday. it is amazing!
made of black plastic, cutted for rs2 predrilled all laser!

[A80Avant]

show us some photos there Eduard!