Paint codes for urs6? Need help identifying!

[domas]

It doesn't. However, if you have access to the Audi data base or know someone who does, entering the VIN will tell you everything about what was installed on the car before it left the factory. I had a friendly dealer produce a 4.5 page (double spaced) document for my 94 V8 S4 avant that told me way more than just the 30 codes on the build tag did. All he needed was the VIN and access to the Audi data base.

Otherwise the square build tag in the warranty book or in the boot/trunk area of the vehicle will tell you quite a lot, including colour, etc.

I can do that.

Please ignore the language but click on pdf file with vin number each post under my messages

http://www.audiklubas.com/forumas/www-autodetalespigiau-lt/modifikacija-pagal-vin-koda/new/#new

incl previous pages. so you will see what I am talking about.

Takes cars from m.y 1992-1994 only.. not for older models.

[varia]

I can do that.

Please ignore the language but click on pdf file with vin number each post under my messages

http://www.audiklubas.com/forumas/www-autodetalespigiau-lt/modifikacija-pagal-vin-koda/new/#new

incl previous pages. so you will see what I am talking about.

Takes cars from m.y 1992-1994 only.. not for older models.

as far as i know you cant get those information offline, need to have audi credentials to pull it off. But please do share if you know otherwise
Thx

[domas]

nobody said that it was easy and offline.
not really audi but lex-com
Long story short you download/buy etka
And get access over partslink24 or etka.epcspft.ru

i chose the russian one, costs 500rub/month, it is about 8 euros iirc

[orignalS60]

Yes all of those factory programs cost money to use.
It has to be worth for you to have a subscription to them.

[domas]

Well not really.
just being a nice guy here and there in the forums and making those modification pdf's and finding exact part numbers on request if the car is 2001+

Years ago it was free. afterwards lex-com closed that possibility. then the Russian site came up, it gave 3 vin/day. Later it reduced to 1 free vin per day and this is where i acquired 1 month subscription, which is until the 3rd of july iirc.

Not sure if i will extend it though. It is just nice to have thing but far from a must have thing. I like playing with part/repair catalogs/software, but thats it.

long story short, need something vin/etka related, let me know, will help.