You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
I am fitting an RS2 bumper to my coupe. in a few weeks, is there anything that's different to the s2 when it comes to fitting it ,other than the indicators etc.
What about the under headlight trims.
I also need to replace the grills, which are missing.
Its an original bumper, so is fixing it straight forward, any BTDT.
I'm no expert but I believe there are some differences with RS2 foglights and there might be a slightly larger allowance for the RS2 intercooler. Have you searched on the forum for this information? I've found that sometimes my questions don't get a response because it's been covered elsewhere.
Hi ,
The under tray is slightly different and I've found a bit of fiddling is required to line up with the inner arch trims .
Fogs and indicators are plug and play . My pull need to make am adaptor for the washer jet hoses to the rs2 jets .
Under headlight trims are different as the rs2 one have a 45deg angle to them however the s2 ones fit without issue
Grill mesh is very rare , I replied on your other thread about buying an equivalent and cutting to suit
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment