Anyone used SPRAY ON plasti dip?

[Finner]

I believe I got it from Amazon. Dont know if it is the "true" plastidip, but it was definitely better than other branded similar paint.
If you do decide to go with it, then make sure to minimise moisture on the part you are painting, its clean and spray 3-5 coats. the more the better as it builds up and it is easier to remove if you want to do so later on.
as for overspray, dont worry about it too much as it peels off really easily on the corners and can be cleaned off with microfiber towel.
There are plenty of guides on how to do it on youtube.

[steve briance]

Right oh! I'm going to give it a go.

I'm looking forward to seeing how it turns out - the idea of spray on rubber paint intrigues me.

I wonder if I could spray the mrs with it?

[90/90qs]

Ive been looking at this for a while undecidedly

https://www.dipyourcar.com

They have a wide product line, and the price is better than painting at ~25% it seems.
I have a gallon of LY3D + clear that I've been waiting to use for years but I need some body work and I thought this could be a temp (black) solution.
Still undecided...
Fwiw I've done my license plate tub and underhood cowling with spray on and it's a great improvement visually, plus has held up fine so far (1 year). If it fails, just spray again; although you'd probably want a yearly maintenance spray for the door trims.

[steve briance]

Yeah, for the cost of the coupe rubber door trims, it would probably be worth an annual repaint if they need it and that way they would always look fresh