Good alternative for weld studs?

[Typ89]

I decided to strip, spot blast and re-coat my transmission tunnel as it is rusty and ugly. However some of the weld studs are snapping off in the process. Any good ideas how to address this? I was thinking of just sticking a screw through from the inside and weld it..
IMG_20170318_135744.jpg

IMG_20170318_135810.jpg

IMG_20170318_135827.jpg

[90quattrocoupe]

You could try rivet studs. That way you don't have to move carpet out of the way, to insert screws from inside.

Greg W.

[Pirvu Eugen]

iff you want..there are those studs for holding brake pipe clips etc... separate and there is a special adapter to the welder to fit those...
I will try to make a photo

[Typ89]

Rivet studs is a good idea.
I've found N90261401 and N90716103 which could be applied with a normal rivet plier. Seems a good alternative. Will ask on monday if the stealer still has them.

[ThatGUY]

Those are cool N90716103

Thanks for the tip

[Pirvu Eugen]

Those are cool N90716103

Thanks for the tip

[A1QSHIP]

This is a great find! I will be installing the B4 left foot rest with these into my Coupe next week.