There's nowt worse than running out of gas in the middle of a sweeeeet weld!
Announcement
Collapse
No announcement yet.
Recommend me a TIG
Collapse
X
-
Originally posted by Twenny Benson View PostHe who dies with the most toys wins!
yeah my GF's bro is a BOC agent so i get gas at cost, and borrow rather than rent the cylinders
I agree we need a fabrication sectionPanthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 Avant
Comment
-
Originally posted by Error404 View Posthaha, thats the quote of the day for me
yeah my GF's bro is a BOC agent so i get gas at cost, and borrow rather than rent the cylinders
I agree we need a fabrication section
Jammy ******, no rental fee and gas at cost! Damn, I pay through my orifice for my gas.
Another thing you should consider is getting a good selection of gas lenses instead of the standard gas collets, you can get away with alot more tungsten stick out and better gas coverage, all makes life easier in a tight spot.
I demand a fabrication section2000 B5 A4 Quattro Sport ~ 2.0 20V GT30R ~ Gone
1993 S2 ABY Coupe ~ Gone
1989 2.2E Coupe ~ Gone
Comment
-
AFAIK gas lenses are only a TIG thing, I use one and they do make a difference. As for gas I bought one of these
http://www.albeegascylinders.com/
I think the bottle cost £125 which was full and comes with a reg, this is then yours for life. When it's empty you take it back and swap it for a full one for about £40, there are no rental charge. For home use where you are not using a lot of gas it's perfect.sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racer
Comment
-
So have you dropped the cash on a TIG yet or are you still thinking it through?
I'm going to ignore those gas prices as im getting properly hosed by the local BOC!
Those gas lense's are for TIG only, well worth the money though.
How do we get a fabrication section sorted then!?! I have a side project for the S2 and there will be loads more that I think deserve there own little thread.2000 B5 A4 Quattro Sport ~ 2.0 20V GT30R ~ Gone
1993 S2 ABY Coupe ~ Gone
1989 2.2E Coupe ~ Gone
Comment
-
Originally posted by Twenny Benson View PostSo have you dropped the cash on a TIG yet or are you still thinking it through?
I'm going to ignore those gas prices as im getting properly hosed by the local BOC!
Those gas lense's are for TIG only, well worth the money though.
How do we get a fabrication section sorted then!?! I have a side project for the S2 and there will be loads more that I think deserve there own little thread.sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racer
Comment
-
I've been using BOC's pureshield Argon bottle size Y. Its £56.98 a refill, plus you have to pay the delivery charge from BOC to the agents even if you collect it yourself!?£! which is £13.05 then you add the dreaded 20%. 84 quid! Then the yearly rental of £83.50 + VAT its a bloody dear do for a bit wind out the torch!2000 B5 A4 Quattro Sport ~ 2.0 20V GT30R ~ Gone
1993 S2 ABY Coupe ~ Gone
1989 2.2E Coupe ~ Gone
Comment
-
Originally posted by Twenny Benson View PostI've been using BOC's pureshield Argon bottle size Y. Its £56.98 a refill, plus you have to pay the delivery charge from BOC to the agents even if you collect it yourself!?£! which is £13.05 then you add the dreaded 20%. 84 quid! Then the yearly rental of £83.50 + VAT its a bloody dear do for a bit wind out the torch!
http://www.albeegascylinders.com/suppliers.phpsigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racer
Comment
-
Has anyone tried those cheap AC DC TIG's on ebay? I understand the quality can't be the same as 4x expencier machine, but does they do the job?
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
Comment