Another low budget diy project. We have a quite big garage with my friend, but it's really diffucult to get two cars inside because of the chape of it. If we could move the first car sideways it would be easy to drive the second car inside. So we have think about to buy car dollies, but you know, with a low budget even 100-200€ is much so maybe a diy solution would be nice on this one.
Also when you put normal dollies under your tires you have to jack the car up every time, so it would be nice if you could drive the car on/off them. We only need to move the car sideways so we don't need turning rollers on the dollies.
Normal dollies:
I was thinkin of to made dollies like this. The profile bend of tear plate, the rollers made of steel and so on... everything diy.
Also when you put normal dollies under your tires you have to jack the car up every time, so it would be nice if you could drive the car on/off them. We only need to move the car sideways so we don't need turning rollers on the dollies.
Normal dollies:
I was thinkin of to made dollies like this. The profile bend of tear plate, the rollers made of steel and so on... everything diy.
Comment