You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
I'm struggling to find somewhere that either sells or will make me an ally hose joiner with a 19mm - 30mm ends so I can set the cyclone / swirl pot system up.
Anyone have any suggestions that would be great....
SAMCO - 32/19 MM BLUE HOSE REDUCER - SR32-19 - Samco Silicone hose.Blue from stock other colours to order (about 4 weeks). Samco standard Polyester Silicone suitable for a maximum temperature of 170C. Standard Race hose for coolant and Turbo applications. Merlin keep in stock a wide range of aluminium hose joiners in diameters to suit Samco and in a variety of lengths. Specials can be made to order. See also the section on aluminium tube.
Any use?
sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racer
SAMCO - 32/19 MM BLUE HOSE REDUCER - SR32-19 - Samco Silicone hose.Blue from stock other colours to order (about 4 weeks). Samco standard Polyester Silicone suitable for a maximum temperature of 170C. Standard Race hose for coolant and Turbo applications. Merlin keep in stock a wide range of aluminium hose joiners in diameters to suit Samco and in a variety of lengths. Specials can be made to order. See also the section on aluminium tube.
Any use?
cheers for that but its an ally reducer I was after.... its to join the daleks head with the inlet of the cyclone and thats the stumbling block....
Crankcase vent is 30mm. Dalek thingy is 19mm in and out. So is the Cyclone input 30mm or 19?
Actually I've made quite a few of these (usually with a T for the pipe from cam cover) but have no stock of ally bar at the mo, if you can send me a bit of bar I'll make you one.
Crankcase vent is 30mm. Dalek thingy is 19mm in and out. So is the Cyclone input 30mm or 19?
Actually I've made quite a few of these (usually with a T for the pipe from cam cover) but have no stock of ally bar at the mo, if you can send me a bit of bar I'll make you one.
19mm inlet.....I thought the daleks head outlet was 30mm....
It doesn't replace anything as such, more that by removing all of the ABY/ADU breather system, you need to do something with the 30mm crank breather outlet - either run a swirl pot or catch tank with a 30mm inlet, like my kits, or drop the size down to 19mm / 3/4" to work with other designs.
Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
its to join the daleks head with the inlet of the cyclone and thats the stumbling block....
John, you did worry me there for a minute....
or 3!....
Comment