Wanting to fix an 01E gearbox into my UR Quattro

[URQguy]

Any pictures in particular you want?

The steering arms are a big headache with stock manfiolds/k04s. The steering bracket was modified, and custom arms were made with some odd bends to clear the turbos. Just delete the idea of using factory manifolds/turbos from your memory!!

We also use the front bi pipes as well, but they really chew up real estate up front. The car is also in to change from the motronic APR software to full standalone VEMS. This will allow us to get rid of the maf problem and then just filter air coming off the turbo inlets. A lot of the OEM emissions controls are deleted too if you go standlone, which makes for a cleaner bay. There is so much stuff in this engine bay, it makes me want to vomit!

I think a single setup using 2.8L NA manifolds with up pipes to a single turbo would be the easiest way to make good power. Guys have run single gt35r's on k04 files with great results.

Also, the y pipe(the rs4 one atleast) hits the hood. This required us to drop the engine significantly to get it to clear. There were some compromises there.

Feel free to ask more. I am off and on this forum, so be patient!

[Rocco]

Hank,advice me when you had all the new 5 pot conversion parts done!

[URQguy]

want me to include them in your latest package?

[ralleyquattro]

Hank,

Mike and I could use one of these trick gearbox mounts for the shift linkage tie rod.

Let me know.

Cheers

[URQguy]

You bet. I am still in test mode. I'll send you guys a set when they get finalized

[Rocco]

want me to include them in your latest package?

No no,I'll be happy with the wastegate for now.

But I'd nice to see what's needed to use that newer rabbits engine into our engine bays....

I'm sure you'll be able to send the whole thing in a pallet for a full conversion

[URquattroGus]

You bet. I am still in test mode. I'll send you guys a set when they get finalized

Would be interested in one too....

[DJones]

Would be interested in one too....

Yep me too..

[jsws3]

Yep me 3

[DamoM]

Any pictures in particular you want?

The steering arms are a big headache with stock manfiolds/k04s. The steering bracket was modified, and custom arms were made with some odd bends to clear the turbos. Just delete the idea of using factory manifolds/turbos from your memory!!

We also use the front bi pipes as well, but they really chew up real estate up front. The car is also in to change from the motronic APR software to full standalone VEMS. This will allow us to get rid of the maf problem and then just filter air coming off the turbo inlets. A lot of the OEM emissions controls are deleted too if you go standlone, which makes for a cleaner bay. There is so much stuff in this engine bay, it makes me want to vomit!

I think a single setup using 2.8L NA manifolds with up pipes to a single turbo would be the easiest way to make good power. Guys have run single gt35r's on k04 files with great results.

Also, the y pipe(the rs4 one atleast) hits the hood. This required us to drop the engine significantly to get it to clear. There were some compromises there.

Feel free to ask more. I am off and on this forum, so be patient!

Hey. Thanks so much for the info. I Some pictures of the steering mods and arms plus some of the turbos and manifolds and one or two complete engine shots would be good! You did offer! ;-)

Did you retain std brakes? We went vacuum on the 20vt so are doing the same on this as it releases so much room.

We were going to go fmic. How are you going to upgrade your car's ones?

What rad did you use and does the car have Aircon?

Thanks so much mate!

[DamoM]

Yep me too..

Hi Darren! It's been a while! The gtx3071r went on the 20vt today.

uploadfromtaptalk1361482316423.jpg

Bit of a squeeze!

[jsws3]

Did you map it today as well or just fit the turbo ?

As I'm interested to know how it performs .

[DamoM]

Did you map it today as well or just fit the turbo ?

As I'm interested to know how it performs .

It's getting mapped next week. Have high hopes for it. I have a Link ecu which is a doddle to tweak.

[AndyP]

Hi Darren! It's been a while! The gtx3071r went on the 20vt today.

[ATTACH]40718[/ATTACH]

Bit of a squeeze!

Is this the stroker or the RR?

[DamoM]

This is the stroker. Have decided to keep the RR 100% std. Means I have a stack of spares that I'd accumulated to mod it now for sale! Inlet manifold, 2 md357 turbos, rs2 inlet manifold etc etc!