just reading through the thread does anyone know the official weight of the aircon components as mine has never worked and if it does weigh 75kg its well worth taking it out!
Announcement
Collapse
No announcement yet.
Removing Aircon
Collapse
X
-
Weight - let's think about it and have a guess based on what components are in there -
Compressor, best guess, 7kg
Aircon 2ndary rad (thin rad behind main rad) - best guess, 3kg
Dryer, best guess, 4kg
Additional pipework, best guess, 3kg
Coolant charge, best guess, 1kg
Have I missed anything?Ex S2 owner, now running around in an A4 Avant quattro...
Comment
-
-
http://www.s2forum.com/forum/showthread.php?t=1641
here you go Lee took it all out and weighed it at approx 18kgEx S2 owner, now running around in an A4 Avant quattro...
Comment
-
Originally posted by dan_bGood stuff - where was it leaking from? How did you fix it?
Cheers..Missing her lots!
Comment
-
Originally posted by s2_bo@ Andy The pipe work might still be the same, ill take some pics and part numbers once its out and if its the one you need im sure you can have it
@ Jamo, i thought you have aircon already???Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss
Comment
-
Are there two versions of air-con for the S2 by any chance?
I know there is a factory fitted air-con system, as well as an 'aftermarket' Diavia system (as fitted to mine by the dealer) for the ur-quattro at least.
It may explain the discrepencies in weight if this is the case.
Comment
-
I always assumed it was 18kg - and mine is (mostly) out now!
Didn't work properly for me (gas probably leaked out) but there will be a pile of bits if anyone has time to look at them and actually wants some of them. They won't be going anywhere in a hurry.
__MDC__Martin Cutting
aka Keeper of "The Teutonic Kitten"
It's not better than sex, but it runs it a close second.
Comment
-
Originally posted by Andy_CaseyI'm after a pipe for mine (ABY). It's the one that goes from near the brake reservoir down to the drier in the front driver's side wing.
http://www.s2forum.com/forum/showthread.php?t=44
It seems that part number for this hose is wrong in EKTA.
Angusformally RS2 +
Comment
Comment