Just ordered my heat shield material from merlin motorsport thanks for the advice Greg, now i need to get my cold air feed sorted. I have done a search cos i thought i saw a thread abot Dougs one but i cant find anything to help. Whats the general concensus on where to fit the cold air feed? Also how to fit it? Thanks for your help
-
3'' Longlife Exhaust, Koni Adjustables, H&R Springs, Full RS2 Setup with Mr Nugents RS2 Chips
(just need the RS2 Airbox) -
If you have the aux rad in place, and an aircon pump, it's a ball ache to get anything of a decent size hose in there.
Removing the aux rad really frees up a bit of room, as does removing the aircon, although that's a bit more drastic. -
i have a rs2 bumper fitted and i was thinking of cutting a hole in the corner mesh insert, although i have not had a look yet. Would that give sufficient flow?3'' Longlife Exhaust, Koni Adjustables, H&R Springs, Full RS2 Setup with Mr Nugents RS2 Chips (just need the RS2 Airbox)Comment
-
while i had the front bumper off my s2 i saw that there is quite a bit of room if you were to atatch a pipe to the boost pipe exiting the intercooler and running the pipe up so the cold air would almost blow under the filter...Pearl white 91-S2-3B K&N cone air filter - Home made induction pipe work - 18" RS4 replica alloys - Yokohama Parada Spec 2 rubber - Colour coded body work - Bilstein/H&R suspension - s/s 3in turbo back Longlife exhaust - SFS water hoses - Samco boost hoses - RS2 FARB - RS2 eyeballs - Squeaky interior trim
& 2 bar! Comment
-
-
-
i got my filter pointing towards the headlight but i dont think it gets sufficient air flow.3'' Longlife Exhaust, Koni Adjustables, H&R Springs, Full RS2 Setup with Mr Nugents RS2 Chips (just need the RS2 Airbox)Comment
-
same here.
Ive made something similar to Soern's setup but not as efficient. need better material.ABY Coupe
sigpicComment
-
what material are you using Soern?sigpic
1992 3b S2 CoupeComment
-
what air filters is ever one using? thing about doing it my self so i will be taking notes
ChefComment
-
K&N here....sigpic
1992 3b S2 CoupeComment
-
HKS Superflow
This is welding blanket.
Got it at work.
It will cope with 1000 deg. cel.
Søren S2Comment
-
Quikshift racing filter with 2 old hoover/hose cold air feeds fed from the front over and under the filter....Originally posted by terrybullwonwhat air filters is ever one using? thing about doing it my self so i will be taking notes
tn_DSCF0198.JPGComment
-
-
does this cause any problems?
ChefComment
Comment