Getting closer

[olsonjus]

Newest update:

[Jon441cc]

Justin it looks awesome Are you making a batch of tapered inlet manifolds ?

[olsonjus]

Yes sir, I'm building 15 of these manifolds right now

[Jon441cc]

Yes sir, I'm building 15 of these manifolds right now

Justin, how much are we talking ?

[olsonjus]

Around $1000 USD with -10AN fuel rail, fuel rail mounting brackets and hardware, and complete manifold with same throttle position as MTM style manifold. The plenum will be tappered and be flow tested to determine the best plenum design for this application. Power steering may need to be relocated. I have to test fit the manifold to find out.

[Jon441cc]

Around $1000 USD with -10AN fuel rail, fuel rail mounting brackets and hardware, and complete manifold with same throttle position as MTM style manifold. The plenum will be tappered and be flow tested to determine the best plenum design for this application. Power steering may need to be relocated. I have to test fit the manifold to find out.

Sounds good Justin would it be possible to use an ABY fuel rail with
one of these tappered inlet manifolds ?

[olsonjus]

You'd have to come up with your own fuel rail mounting brackets but I dont see why not. At first I'm going to be offereing them as complete packages with fuel rails as I already bought all of the material for complete setups.

Regards,
Justin

[Jon441cc]

You'd have to come up with your own fuel rail mounting brackets but I dont see why not. At first I'm going to be offereing them as complete packages with fuel rails as I already bought all of the material for complete setups.

Regards,
Justin

Well thats fair enough, Can't wait to see the finished product

[olsonjus]

PROGRESS

Old design is on bottom. It wouldn't clear the 3B external water manifold so I redesigned it. At the same time I switched over to oval runners and high flow oval velocity stacks.

Larger pic here: http://forum.vwsport.com/pics/data/500/DSC03655.JPG



Larger pic here: http://forum.vwsport.com/pics/data/500/DSC03656.JPG

Next up is finishing the injector ports and fuel rail mounts

[jogi730]

Where did you get the trumpets (if that is what they are)?
Cheers
Chris

[olsonjus]

The velocity stacks are from www.Rossmachineracing.com

[olsonjus]

Here are pictures with the water manifold mounted:

[Jon441cc]

Justin, will the manifolds your making look similar to this ?

[olsonjus]

Yes, the plenum will be formed and very similar to that plenum

I'm trying as hard as I can to make the best inlet manifold for the 20v that I can.

Regards,
Justin

[Jon441cc]

Yes, the plenum will be formed and very similar to that plenum

i'm sure there will be alot of interest then, Awesome work btw