stop the boom!

[pjeast73]

my new Milltek to my untrained ear is exactly like stock - or as close as - which is how I wanted it

[charlie]

Milltek, it supposed to be slightly louder than stock and where I will probably go if I need to replace the Exhaust...

Cheers,

Steve.

I agree with you fatty.
i have a 3" cat back Milltek system on my RS2.Looks and sounds perfect.
I also have cat bypass pipes.
they are designed and acustically tested.

If it's a boomy sound it's more likely to be resonance from the centre section
not the rear

My observations is that poweflow are just a bunch of welders and not much enginnering goes into it.

Robo had a turbo back system from longlife and his was nice.

[Jamo]

Robo had a longlife system 3" downpipe to tip.

heard it lastnight and it's the same sound as my RS2 Milltek system.

[peter]

sorted this ourselves in the end,cut open the back box,internals were not a pretty sight,a 3"baffle ran halfway down the box this then branched through two 1.75" baffles to the exits.these two baffles were creased were they had been bent and the whole lot was poorly tacked in place.cut this lot out and replaced it with two lengths of 1.5" baffle from front to rear.the boom is gone!no loss of power.
i guess the answer is to only go to people with proven knowledge of these cars.next time i will go down the miltek route.

[Jamo]

Milltek have been overtaken in performance by a company called Blue Flame, they do a allot of dub exhausts.

http://www.blueflameperformance.com/car/exhausts/index.asp