Hello guy,
Today decided to measure the air flow through my maf sensor on my audi 80 cabrio 1,9tdi. I did this under engine module —> measuring blocks. There are two columns, first i guess is the design value (240-320, sorry cannot recall the units now) and second is actual reading. And my was reading ~550 at idle. Could not measure while driving (laptop doesn’t work without power cable). So decided to unplug the connector that goes to maf while engine running. There was absolutely no change in idle or anything else.
So is it safe to say my MAF is dead?
P.S. The power to the connector is present.
Sent from my iPhone using Tapatalk
Today decided to measure the air flow through my maf sensor on my audi 80 cabrio 1,9tdi. I did this under engine module —> measuring blocks. There are two columns, first i guess is the design value (240-320, sorry cannot recall the units now) and second is actual reading. And my was reading ~550 at idle. Could not measure while driving (laptop doesn’t work without power cable). So decided to unplug the connector that goes to maf while engine running. There was absolutely no change in idle or anything else.
So is it safe to say my MAF is dead?
P.S. The power to the connector is present.
Sent from my iPhone using Tapatalk
Comment