Announcement

Collapse
No announcement yet.

83mm - 70mm silicone elbow?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 83mm - 70mm silicone elbow?

    Does anybody know where I can buy a 90 degree silicone elbow, with an 83mm on one end and 70mm on the other end?

    with a minimum leg length of 100mm each leg?

    cheers.
    C4 A6 AEL avant quattro: daily

    TYPE-85 Coupe Quattro: clicky
    2.5L GTi engineering RE2500 190hp.180lb
    Schrick 272 cam
    C A C 2.5" T304 Exhaust
    ITG filter

  • #2
    There’s a 70-80 here

    https://rover.ebay.com/rover/0/0/0?m...2F190892513728

    S2 Coupe 3B Project


    Ur quattro restoration

    S2 Avant

    Boost is the new rock and roll!
    sigpic

    Comment


    • #3
      Originally posted by newsh View Post
      Cheers.. Don't think that will be big enough though.

      tbh .after taking a second look, I really need anything between 83mm to 88mm at the big end. 83mm is bare minimum really.
      C4 A6 AEL avant quattro: daily

      TYPE-85 Coupe Quattro: clicky
      2.5L GTi engineering RE2500 190hp.180lb
      Schrick 272 cam
      C A C 2.5" T304 Exhaust
      ITG filter

      Comment


      • #4
        Have you got room for one of these with an elbow on the smaller side? There’s an 83 -70
        Or 90-70

        S2 Coupe 3B Project


        Ur quattro restoration

        S2 Avant

        Boost is the new rock and roll!
        sigpic

        Comment


        • #5
          Or get Roose to make you exactly what you need

          S2 Coupe 3B Project


          Ur quattro restoration

          S2 Avant

          Boost is the new rock and roll!
          sigpic

          Comment


          • #6
            I was going to suggest Roose if a 70-90 won't do... but surely if it's 88mm, 90mm will be close enough?

            Roose made me a rad hose, copying a mock up I sent - received in 10 days from when I posted them mine. superb service (but not exactly cheap...)
            Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
            S2 Coupe... bit easier off the line...
            '03 ZX12-R daily hack.... lots of nice bolt ons...

            Comment


            • #7
              Cheers guys
              I've gone for a 70-90 reducing elbow

              let's hope it will squash down.

              though.. Now I'm worried it's not long enough. :s

              I thought the leg length was from the inner bend, but I think it's measured from the outer bend.

              oh well, will soon find out.

              anybody wanna buy a silicone hose if its not the right size ?

              lol
              C4 A6 AEL avant quattro: daily

              TYPE-85 Coupe Quattro: clicky
              2.5L GTi engineering RE2500 190hp.180lb
              Schrick 272 cam
              C A C 2.5" T304 Exhaust
              ITG filter

              Comment


              • #8
                I had similar issue with one of my hoses just got a 90 degree bend same diameter hose even though it was different size each end on the oem pipe the new one fits fine just tighten the clips up and it nips up OK

                Comment


                • #9
                  You do not have permission to view this gallery.
                  This gallery has 1 photos.

                  Comment

                  Working...
                  X