individual throttle bodies

[Henkjan]

while browsing the BOM webshop, I came across this:
http://www.badobsessionmotorsport.co...rottle-bodies/

anybody has seen this mounted ?
"only" needs some modifying to fit turbo cars....

audi3.png

[Bowie69]

Yes but did you see the price.....

[blackS2]

waste of money on S2

[rxl]

looks cool but why do you need that for that price?

[Bowie69]

waste of money on S2

On a 7A though... Would sound awesome. Still not worth the price though.

[mac2226]

I’ve heard throttle bodies on kv 10v sounds very good.

[Henkjan]

looks cool but why do you need that for that price?

You said it, looks great. Plus I like the idea. Price is rather high, but that goes for many upgrades.

maybe on my KK 80urq is a better idea

[Hollizini]

A swede is running this setup on he's urquattro trackcar.

[Bowie69]

https://m.youtube.com/watch?v=0MjthtT9vEQ

[steve briance]

Watched that many many times. My word revs rise fast and also seems to pull pretty damned hard too. There is a bit where the last you see of the rev counter is it steady at 7000rpm and driver plants throttle and presumably the car accelerates so hard the camera moves and you stop seeing the rev counter. 8000+rpm?!?

[Rikki Kitto]

A swede is running this setup on he's urquattro trackcar.

[PRY4SNO]

There have been a few who've done so Stateside, I believe one low cost option was to use 1000cc street bike throttle bodies.

Petar A. did a great job going the DIY route on his Cq, unfortunately it never got a turbo.

https://www.motorgeek.com/viewtopic.php?f=6&t=15546&start=175

[Thuppu]

BMW throttle bodies could be fitted. Some hassle gives that it is difficult to get the vacuum/pressure thing.

[mac2226]

Yes the s85 5.0 v10 has two banks of throttle bodies 5 cylinder per bank which could be used Maybe?

[andrewcoupe]

https://youtu.be/8ql7rblAbG8

I had a set if 45mm toyota throtlles on my 2.0 NM 20V engine. It sounded great, but didnt perform as good as it sounded. Not worth all the effort unfortunately. Lots of things have to be modified to fit. Custom radiator as trumpets were hitting original radiator. Remove brake booster for trumpets. Move the ps pump etc.

Im now busy with a AAN turbo with this ITB SETUP.