Had my exhaust built and fitted by exhaustsuk of pimp my ride fame (don't let that put you off).
The exhaust spec is 2.25" from downpipes back (cat bypass) into a 2 x 2.25" to 3".
3" 'Y' piece, 3" pipe to a straight through centre box, then 3" to the non-baffled rear silencer.
Mandrel bends.
304 Stainless Steel.
Hand built.
25 year warranty.
Free maintenance (except for parts etc)
Extra flanges fitted to old cats to make it easier for MOT time.
Hard to descibe sound in words but I'll give it a go. A little boomy/roary from 2200-3200 (but it is new). Nearly no internal noise at cruising rpm (3400-4200). Really nice turbo i5 sound from 3200 if you give it beans. Turbo is slightly more audible too.
Had a close look at the workmanship today when I was doing an oil change and was really impressed, very solid, good welding etc.
No knocks/rattles, it's even had the speed bump test and it passed with flying colours.
Really great place to deal with too.
£500 all in.
I'd say cheapest 3" cat bypass in the country and probably one of the best seeing as you can tell the guys the exact spec, they will tune it for specific sounds in specific rev ranges. They can make it as loud or as quiet as you like, or anything in between.
They aren't a "boy racer" outfit either as they do trucks, bikes, all sorts.
I've attached pics, I forgot my camera so had to use my phone and they are a bit crap, sorry.
The exhaust spec is 2.25" from downpipes back (cat bypass) into a 2 x 2.25" to 3".
3" 'Y' piece, 3" pipe to a straight through centre box, then 3" to the non-baffled rear silencer.
Mandrel bends.
304 Stainless Steel.
Hand built.
25 year warranty.
Free maintenance (except for parts etc)
Extra flanges fitted to old cats to make it easier for MOT time.
Hard to descibe sound in words but I'll give it a go. A little boomy/roary from 2200-3200 (but it is new). Nearly no internal noise at cruising rpm (3400-4200). Really nice turbo i5 sound from 3200 if you give it beans. Turbo is slightly more audible too.
Had a close look at the workmanship today when I was doing an oil change and was really impressed, very solid, good welding etc.
No knocks/rattles, it's even had the speed bump test and it passed with flying colours.
Really great place to deal with too.
£500 all in.
I'd say cheapest 3" cat bypass in the country and probably one of the best seeing as you can tell the guys the exact spec, they will tune it for specific sounds in specific rev ranges. They can make it as loud or as quiet as you like, or anything in between.
They aren't a "boy racer" outfit either as they do trucks, bikes, all sorts.
I've attached pics, I forgot my camera so had to use my phone and they are a bit crap, sorry.
Comment