3 inch downpipes

[Keeper of The Kitten]

I'm having mine custom made (would have been at work if we hadn't all been laid off!) ...most likely get Nick Paravanne to do it as he's quite local ...mine will have a conical transition as it is for a K26 flange, but if I switch to a Garrett I will just get the end cut off and remade to a new design.

[k.alle]

Any pictures?

Sorry mate, I have been searching for pictures on your behalf, but I can't find any.

They should be top notch though, as ACE-Competition has a really good reputation.

[Bram]

I found a nice one from PK Motorsport for 500 Euro on their website. Anybody experience with this DP?

[Jamo]

I found a nice one from PK Motorsport for 500 Euro on their website. Anybody experience with this DP?

Bram did you find anymore about this?

http://www.pk-motorsport.de/teile5.html

Doesn't look the best but then if it works

[Bram]

Bram did you find anymore about this?

http://www.pk-motorsport.de/teile5.html

Doesn't look the best but then if it works

I have not seen the DP from PK in real, but I know it is optimized for S2 instead of the 034 one, so next time I would buy this one from PK. I don't care how bad it looks, as long as it works optimal, it is good enough for me

[MattS2]

I'm going to have to agree.
It's vital that the downpipe fits well - forget what it looks like.
My car was on the ramps at the garage for 2 days whilst trying to get the 034 downpipe to fit.

Matt.

[Bram]

I'm going to have to agree.
It's vital that the downpipe fits well - forget what it looks like.
My car was on the ramps at the garage for 2 days whilst trying to get the 034 downpipe to fit.

Matt.

Exactly what I figured out the hard way. The 034 DP is made for UrS4 and not S2 or RS2. The same counts for the 034 MAF hose that came with the GT3071R kit. The N75 and DV had to be re-routed from the front, since the openings in the MAF hose are at the front. And in the S2 I have my headlight unit sitting at that spot

[Jamo]

Does anyone know if PK Motorsport speak english?

S2_Bo I may require services

[anton]

ok, i dont have a turbo so not too sure bout all this but how come these are so expensive, i paid circa £400 for my manifold back in 2.5" and he said it wouldnt cost much more for it to be 3" and its only another 6 inches from where mine connects to your turbos...so how come the steep price?....pro speed is where i got mine done, charley the guy that owns it can do anything including manifolds, which i seem to remember him quoting me about £5-600 IIRC

Ant

[A80Avant]

Yes Peter speaks english but try calling him,he doesnt answer emails very often.He has answered mine though

[Jamo]

Yes Peter speaks english but try calling him,he doesnt answer emails very often.He has answered mine though

I'm in the U.K, calling internationally during work hours is monitored where I am even though I deal with all of the globe.

So it makes it a bit awkward.

[GazzaG60]

quattronics provided mine made custom to the car. i would not recommend a non custom unit Jamo. i can take a picture of it if you like. its a work of art.

wasn't aware jp could do 3" but maybe thats changed.

[Jamo]

quattronics provided mine made custom to the car. i would not recommend a non custom unit Jamo. i can take a picture of it if you like. its a work of art.

wasn't aware jp could do 3" but maybe thats changed.

I have no desire to use the above company unfortunately.

If you have a pic i'll be interested to see as I may go to the source direct who makes exhausts in that area.

[A80Avant]

i bet you will get an answer on the email.Last time i asked him about some cams,he responded in a couple of days

[Jamo]

i bet you will get an answer on the email.Last time i asked him about some cams,he responded in a couple of days

I've had no response, is there anybody in Europe or speaks German who could ask on mine and a few others behalf?