Anyone removed a silencer from their Milltek ?

[raymor]

oh... and that's with my own 3" DP on V band clamps

[raymor]

I'll tell you exactly what noise levels you get.

No cats + standard Avant Milltek is 87db - as read on my own Noise level meter and confirmed by the scrutineer.

No cats + single rear box Milltek is 100db (centre box bypass) - as read on my own NLM and confirmed by two scrutineers. One at 100db and the other chap read it at 101db.

Bypass pipe is a good idea if you can make the noise level at your track day

cheers
Raymond

[Jamo]

It makes a hell of a difference though with 3" system to the noise.

Dest had a smaller downpipe and his was quite a bit louder than my car which has a larger downpipe and twin box.

[s2driveruk]

my stainless is only a one box setup and on a 2x2.5 diameter is not drastically noiser than oem IMO

[DarrenM]

Matt, you've heard my system, but thats with a Magnaflow back box and 3" down pipe too. I think with standard DP and 2.5" Milltek & backbox it wont be as loud as you think chap. I took the centre box out of my MIJ system on the V6 and tbh didnt really make that much of a difference.

[Rusty]

I was thinking about it but as Jamo says, track day noise regs pretty much require a 2 box system.

[Jamo]

Dest has and yes it makes it louder, your a nutter for doing it! no track days for you

[Matt_D]

I'm thinking of getting someone to cut out the 'middle' backbox just before the rear axle on my Milltek and replacing it with a straight through pipe

Just wondering if anyone has done this or anyone have a similar system and know how much louder it will be ?

Cheers n