Intake manifold porsche inscription

[Morris400]

Id be in for one or two as well.

[nick]

Count me in aswel.

[Antsa]

I also found this thread a while back and would be intrested too

[ralleyquattro]

Hello, do you have anymore of these? I would like to buy some. Thanks

[willg54]

finally got mine stuck on...I used Unibond repair extreme glue. has a high temp limit of 120degC, most others seemed about 60. its stuck hard anyway

[audinut]

ah ok ! i did wonder

[willg54]

KATE??

rocker cover , cam cover either or ......

kate = etka - the audi/vw parts programme thingy

[audinut]

there wont be anything s2 specific on there. You just need to ask our good friend KATE and she'll tell you what to use!

The wastegate nuts are M5 i think...and the cam cover bolts (its not a rocker!) are M6X35

KATE??

rocker cover , cam cover either or ......

[willg54]

will what dimesions are the rocker bolts and wastegate nuts? couldnt seem to find anything s2 specific at the site

there wont be anything s2 specific on there. You just need to ask our good friend KATE and she'll tell you what to use!

The wastegate nuts are M5 i think...and the cam cover bolts (its not a rocker!) are M6X35

[andy10v]

go here at your own risk...you may end up spending lots of money

http://www.pro-bolt.com/

You can spend a lot of money on there if you starting cleaning everything up.

We have a few builds where almost everything is swapped to Ti/alloy fasteners in the name of lightness, it really adds up fast. You can also get carbon bolts;

[audinut]

will what dimesions are the rocker bolts and wastegate nuts? couldnt seem to find anything s2 specific at the site

[willg54]

nope, they're dome washers.

go here at your own risk...you may end up spending lots of money

http://www.pro-bolt.com/

[cooperquattro]

posted 1st class recorded, so should be with you on Monday!! There are a couple left to post due to lack of addresses, but they will be posted Monday

Here's a teaser for you all (engine no included in sale)!

what are the blue bits from on the rocker cover??...m/cycle bar ends??

[willg54]

Hi Will, I ahve still not recieved my precious, have you anymore to send out M8.

Mark

you were in the 2nd group buy! http://www.s2forum.com/forum/showthr...t=55846&page=4

Recieved them today so will be posted in the next couple of days

[portzi]

Hi Will, I ahve still not recieved my precious, have you anymore to send out M8.

Mark