problem with intake manifold & throttle

[ChO^4Ko_BG]

I assemble ААN engine with 3B intake manifold and AAN throttle.I've changed the ventil's cover with that from ABY .Тhe problem is that the throttle touches in the ventil's cover and I can't understand where is the problem - in the throttle or in the intake manifold Is there any difference in the sizes between 3B & ABY intake manifold ,AAN and another throttle ?

Greetings!

[rs200]

when i want the same think to do on my 3b i have a problem with distributor cap.

but i used 3b throttle,rs2 manifold,s4 ventil cover.

i have to cut a piece of distributor cap.

mabye is some diferent between rs2 and s2 manifold

[rs200]

i went too locke a little bit closer.
it is inposible to put 3b intake manifold on aby ventil cover
you must find out a aby manifold ,or adu manifold.

but you CAN NOT put a ABY manifold on AAN ventil cover ,but ADU you can.

the throttle is not the problem.

[ChO^4Ko_BG]

Тhanks you for the reply

[Serzyk]

AAN Cover with 3B Intake & Throttle

[kwlw]

AAN Cover with 3B Intake & Throttle

Nice job.

Sau