Anyone got aSound Clip or Video of Milltek on RS2?

[Lloyd]

Milltek system vs. OEM

Some shots....

I had to visit the factory to have about 3" chopped from the system to ensure it fitted properly. You can see the 'before' and 'after' shots of the tailpipes. Based on my personal experience the Milltek system does not fit correctly from the box. We found when initially fitting up, to get it to clear the drive shaft/roll bar/subframe etc it hung down way too low at the tail pipes and also stuck out way too far. You could almost trip over it once it had heated up!

Nevertheless, Milltek's customer service was excellent and Phil offered to modify it to fit properly, which took a few hours in Nottingham. I am one very happy customer and for the record have not noticed any booming or droning with this setup.

The Milltek is also hugely lighter than the OEM system - easiest way to save some KG's!

[QuattroFever]

used to have a milltek on my 3b, didnt notice any drone. Near stock at cruise speeds.

if i could go back now. Id scrap my longlife and get a millie and get it modded too.
If you can afford it, id say do it.

Been for a ride in lloyds and its spot on.

[europeanme]

this is the start of mine...custom job....3" all the way...

[A80Avant]

yes i believe AAS can do that, but speak to them and you can find out everything including costs

[Sleeper_Avant]

Speak to stuart at AAS, their work is second to none!!

i will post a few pics of my 500+bhp cosworth,
i have never ever had anyone do any work like Stuart had, the only thing i regret moving from newcaste to essex is losing the services of AAS, seriously.

will post a few pics now

[Sleeper_Avant]

here we go

http://img.photobucket.com/albums/0603/cossiekid/DSCI0026.jpg?t=1279238595

http://img.photobucket.com/albums/0603/cossiekid/DSCI0027.jpg?t=1279238682

http://img.photobucket.com/albums/0603/cossiekid/DSCI0025.jpg?t=1279238682

and a cheeky little clip off youtube of a 2nd http://www.youtube.com/watch?v=pYE1mAy-yLYgear antilag launch from a petrol station in Damien

[UUUdirs2newcastle]

The BIG question is............. Is the Milltek 3" All the way to the back of the cats?

[AndyP]

Yes, my brother used to have one on his avant and it was perfect, noisy enough to be interesting but not too noisy as to be anti social, and no droning.
Only slight issue is the fittment, it really need shortening by about 2" to pull the tailpipes in.