Egt system

[Simons]

Hi guys!

I´m searching a egt system with 52mm digital gauge. I found this on ebay, what do you think about it??

I think that the kit doen't includes the exhaust sensor becouse the advertisement says "K-Type Thermocouple (sold separately) "... another £30 at least...

http://cgi.ebay.es/ws/eBayISAPI.dll?...=STRK:MEWAX:IT

Anybody knows a good egt kit with 52mm digital ºC gauge??

Thanks for yours opinions

[Rocco]

Hi guys!

I´m searching a egt system with 52mm digital gauge. I found this on ebay, what do you think about it??

I think that the kit doen't includes the exhaust sensor becouse the advertisement says "K-Type Thermocouple (sold separately) "... another £30 at least...

http://cgi.ebay.es/ws/eBayISAPI.dll?...=STRK:MEWAX:IT

Anybody knows a good egt kit with 52mm digital ºC gauge??

Thanks for yours opinions

Zeitronix is your friend

or AEM ....

because you have to buy a EGT and AFR/Lambda sensors

dont waste your time and money buying parts like "gauges for see AFR on narrowbands"

[quattro]

http://www.autometer.com/cat_gaugede...earch&gid=3300

As close as your going to get to OEM looking if your that way!

[prj]

http://www.s2forum.com/forum/showthread.php?t=49127

[Simons]

Zeitronix is your friend

or AEM ....

because you have to buy a EGT and AFR/Lambda sensors

dont waste your time and money buying parts like "gauges for see AFR on narrowbands"

Hi friend, for the moment I will put the egt becouse my AFR goes well

http://www.autometer.com/cat_gaugede...earch&gid=3300

As close as your going to get to OEM looking if your that way!

It's nice but I prefer a digital gauge

http://www.s2forum.com/forum/showthread.php?t=49127

I read it, the best of this kit is the datalogging, as you said, to see all the parametres at the same time on your pc...but the gauge...

[prj]

I read it, the best of this kit is the datalogging, as you said, to see all the parametres at the same time on your pc...but the gauge...

The gauge is the display, you can use a cable and fit the display anywhere like.

Also, it has EGT output, and you can buy a Gauge for it here for 75$:

http://www.14point7.com/Accessories.php

It is in fahrenheit though, not sure if the author does them in Celsius as well.

[Simons]

I´m going to send an email!!

I prefer the display in red but I could change it

The problem to fit the other display, is where??becouse is square....I could fit under the dashboard behind the steering wheel...but I don't like very much this place, I can't read it well and in the place that you install it, the gauge is too much visible in my opinion but it's easy to see the numbers......the best of this kit is the datalogging,you could analize the datas quietly at home

[prj]

Well, you can see how it is in my car
It does not obstruct the view and I can read it nicely.

[Simons]

yes, it´s on a good place to see it and doesn't obstruct the view...but I like to put the gauge on the center ventilation grilles, with the others....but appart of the apperance is a very good tool, simple and clear, to analice how works the engine with differents setups for example...that is why I haven´t decided yet, and isn't expensive...

I´m going to read your post again

[andy10v]

What about getting the one prj suggests , hiding it away and using one of its outputs to drive a gauge of your choice?

[prj]

What about getting the one prj suggests , hiding it away and using one of its outputs to drive a gauge of your choice?

What he said.

[Simons]

What about getting the one prj suggests , hiding it away and using one of its outputs to drive a gauge of your choice?

What he said.

It's a nice idea but it's only available on F...here the email answer

Hi, Sorry on [F], yes it includes all parts required to install it.

I would like to have it in C...

[andy10v]

It's a nice idea but it's only available on F...here the email answer

Hi, Sorry on [F], yes it includes all parts required to install it.

I would like to have it in C...

Get a gauge in *c with a 0-5v input?

[Jonas_R]

vdo sells a egt gauge and it is looks oem.

search on www.summitracing.com

[Simons]

Get a gauge in *c with a 0-5v input?

I think that it couldn't work well...because the gauge couldn't translate
F to C signal

vdo sells a egt gauge and it is looks oem.

search on www.summitracing.com

I saw it in another web in C, look at the price of the kit....awesome

http://www.gt2i-tuning.es/Kit_Pirometro_900&deg_12V_52mm-p-758-c-4_315.html#

I´m searching a digital gauge, becouse is more clearly to read it and in C

I like this but it isn´t digital...and it's also available in white

http://www.summitracing.com/parts/SGG-ST3313/?rtype=10