Air Filter for 100mm turbo inlet ??

[ian4455]

Can anyone recommend an air filter for 100mm turbo inlet dia?

[Jamo]

Hks bmc f1 filter, aem, kn
A depends on space available

[rs2infiziert]

does anyone have mad experiences with the different solutions? I plan to use the K&N41-1400, because i guess it will give the best flow in combination with the cleaning effect. But with 46cm length it is surely a task to find a proper pace for that monster.

[jade]

Can anyone recommend an air filter for 100mm turbo inlet dia?

Got one of these if you need to relocate the filter

http://www.034motorsport.com/engine-...e-p-18577.html

[ian4455]

Thanks I've seen one of those on here for sale, i was hoping to go for a filter that will go straight onto the 100mm inlet. Not sure about exhaust temperatures creating warm air though !

[Jamo]

Got one of these if you need to relocate the filter

http://www.034motorsport.com/engine-...e-p-18577.html

That thing is rubbish, I bought one. It's only about 2" just before the turn and then has a flare to the 4"

It tapers in size from the MAF outlet all the way to the bottom, turns then flares to a 4"

It is highly restrictive and I had to remove it as it was strangling my 3076r

[Jamo]

Thanks I've seen one of those on here for sale, i was hoping to go for a filter that will go straight onto the 100mm inlet. Not sure about exhaust temperatures creating warm air though !

Do you have a MAF? as you can't do that with a MAF setup.

Look at my thread about filter setups for ideas

[andy10v]

Do you have a MAF? as you can't do that with a MAF setup.

Look at my thread about filter setups for ideas

What about moving the maf to the pressure side?

[Jamo]

What about moving the maf to the pressure side?

*sits back and awaits prj to beat you with a big stick*

In all honestly it depends on who is mapping it and what they advise

[ian4455]

I won't be using a MAF with my set-up.