MAF to Turbo Hose Size

[bikerjim]

I'm hoping someone might be able to measure a MAF to Turbo intake hose for me. I'm just after the internal diameter of both ends please. :thumb:

[prj]

Off the top of my head - MAF is 80mm and turbo inlet is 70mm.

[bikerjim]

Ahh that sounds good to me, can anyone confirm this?

[spink]

turbo inlet are 50mm I think

[prj]

turbo inlet are 50mm I think

No. Size of the inducer is around that, not the outside diameter.

[Torben.E.]

Stock AAN turbo is 56 mm if that helps

[Jamo]

MAF is 80mm stock turbo is 57mm or 2.25 Inch

[bikerjim]

Awesome, thanks chaps

[prj]

Ah right, now I know where I have the 70mm from.
That's what you need to install a K26/K27

Stock is indeed close to 60mm (57mm) as Jamo pointed out.

[sam80quattro]

is this for the t28 jim? does the airbox fit along side it?? be nice to know

[bikerjim]

It certainly is sam. Been madly collecting parts for this weekend. Hoping to get it all on.

the dimensions for the inlet and outlet of the hose seem good so hopefully it wont be too far off. I have no idea if the airbox will fit. Im hoping it will, but if not I will fab something up I think. I'll try take loads of pics for the thread but cant promise

[|Maku|]

Does any of the aftermarket companys offer turbo inlet hose for 3B/ABY/ADU that has 3" turbo inlet? I mean specially for 3B/ABY/ADU because they have bypass on the right side of the hose but S4/S6 have it stright.

And one more thing, is there a turbo inlet hose for bigger bypass or for two stock size bypasses?