Inlet duct

[Pisobiker]

Maybe got an idea....

gimme 5 minutes to put in on a drawing.

[audiman]

Yeah thats for the DV

[Pisobiker]

Never mind.
Thought you could just go right side of headlamp with a 45° silicone curve, and then down with maf and filter, but now I was missing you still have the pipe coming from the IC in that area....

[Jamo]

Could you fit 2 right angled silicon hoses on Maf and turbo with alloy join tapped for dump valve?

[Greg_S]

Dont think there is enough clerance between the headlight and the turbo for that.

[Fat Audi 80]

LMOA @ this thread!!!

[SteveH]

Hmm, that looks like a big restriction for your airflow m8. I'd cut a hole in the wing and mount the airfilter on the side of the wing!

[Jay]

Hmm, that looks like a big restriction for your airflow m8. I'd cut a hole in the wing and mount the airfilter on the side of the wing!

Ive noted from a few of you with big turbos and TB E/M's that there is not enough room at the front for the inlet pipe work,

2 thoughts can the turbo be swopped end to end and moved back (new E/M) so the down pipe is at the front (has anyone done this???) or use Audi 80 indicators carbonate plastic lens cover over single head lamps (if you know what i mean? ) so you gain space by the side of the new single lamp.

Jay

[Greg_S]

I think the problem with doing that with the turbo would mean that the oil & water feeds/returns would be back to front, then you have the problem of getting a 3" pipe around the turbo to the front of the car and still getting the outlet from the coldside of the turbo to the intercooler.

I think i'd choose to keep it in the stock orientation personally

[Jamo]

You sure couldnt? use 4 right angled silicon hose you could maybe sqeeze it back on itself.

1 up of turbo, 1 back towards turbo, 1 back towards front and then down back towards MAF.

Hey gotta be better than Uber!

[audiman]

Yeah, im gonna have to come up with another idea on this one, i had another lok today and its a real bottle neck in the system. Im gonna have to mount the MAF in the pressurised pipework.

[Mark Halligan]

Yeah, im gonna have to come up with another idea on this one, i had another lok today and its a real bottle neck in the system. Im gonna have to mount the MAF in the pressurised pipework.

LOL just got back from a few days away and read this thread. Cheers Tom I needed a laugh .........go on, leave it on

[Jamo]

Uber always brings a smile to my face!!!!

[Fat Audi 80]

Me too.

[terrybullwon]

That’s a flying pass in the university degree of bodge 10/10