angle grinder + air filter...LMFAO
Pancake air filter???
Collapse
X
-
@Paul, What the **** was that?? Is your wifes cooking that bad?? Or did you youngen make it?sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
LMAO @ scat omelette!!!
My air filter isnt that badsigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
Pics of modded air filterAttached Filessigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
andAttached Filessigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
anddAttached Filessigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
Tom,
how much room between the turbo and the back of the headlight, looks like it might be a bit tight for the the HKS filter?Mark - ModdedComment
-
about 3". But that doesnt include the neck of the turbo where the filter goes onsigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
That pancake thing was the first I found after a serach on google. It looks like someone puked on a plate and slapped it in the oven. Or shat on a plate.
Tom ur gonna be sucking in so much hot air with that.
What about a hose from the turbo to the front of the car with a cone on? Is there somewhere to thread it through all of the pipes? Better still, a pipe from the oil cooler duct or front grill going to a flat panel filter then a pipe going into turbo.
I'm gonna have a go at fitting that big filter thing this week and will take photos for you to laugh at, but hopefully it'll go on. If need be I'll fit a smaller cone and encase it in some kind of surround. A cut up plastic bin is the best candidate for that so far that I can find... *bodge bodge*
Was sure there was more room under the bonnet that that....
'The Bacofoil Express'...
No more.
Leon TDI 150 run in now.
Very slow.
Needs a chip.Comment
-
It may be possible to get a silicone bend on the end of the blower, but i dont have a spare 35 quid to spend on one to cut up and try, only to find that the fooker doesnt fit!!
sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
Hmm, remove headlights and fit a couple of Cibies on the bumper??Comment
Comment