RS2 Miltek V Jetex

[rustybullethole]

Hi

Anyone know if there is any sound difference between the MIltek and the Jetex, I have a Miltek fitted to my RS2 at the moment and its a bit "boomy" for my liking, i have been out in an RS2 recently that has a standard Audi system still fitted and i love it, its nice and quiet and just what i would like. I see there is a Jetex system available and was wondering if anyone eho has one fitted could give a review of that system on here please.

[cardcrash]

I have a Supersprint fitted to mine which sounds great at WOT and pretty quiet otherwise. Only thing I can say about Jetex is that Will was going to fit one to my other one but sent it back saying the build quality wasn't that good for the price so went custom.

[Ross]

If i can remember back to last time I was able to drive mine... the scorpion + 3" downpipe is still a bit boomy around 3k. It's loud on full chat but very sedate around town and idle, certainly not something the neighbours would have any issue with.

That said when my brother had his Miltek I personally thought that was a slightly better 'daily' sound, so if you are finding that boomy I'm not sure I would suggest a Scorpion. More likely you need to get something 2.75" at the rear rather than 3" to quieten it down. I remember Lloyd had some good success simply messing with the mountings in the middle, in attempt to take the booming out of his 3".

[A80Avant]

I didn't like milltek either. Initially I had a 2.75inch with a 3 inch downpipe for sound reasons and finally I had one 3 inch made by advanced automotive systems here in Newcastle which is the only shop that managed to custom fit the largest silencers and their technology to eliminate resonating sounds. It's still a bit louder than oem as you would expect but it's essentially wife approved so you can't argue with that

Sent from my SM-N910F using Tapatalk

[andyg plym]

I personally found having a stock back box made all the difference, I ran it on my 3" straight through with just one small silencer

[Avantus]

Jetex is pretty quiet and not boomy at all.

[mcandmar]

I don't find my milltek boomey at all, maybe i just have different standards to everybody else. I did find it a tad loud with cat bypass pipes, leaving the cats in really does mellow the sound.

[Ian Simmonds]

I don't find my milltek boomey at all, maybe i just have different standards to everybody else. I did find it a tad loud with cat bypass pipes, leaving the cats in really does mellow the sound.

I'd second that, we really enjoy our Milltek turbo back system on the S2. (Thanks Andyplym)

[andyg plym]

I'd second that, we really enjoy our Milltek turbo back system on the S2. (Thanks Andyplym)

No problem bud !! Part of me wishes I'd kept it

[M_GORDON]

Hi.
I have a Supersprint DP (70mm/2,75") and a oem system on 65mm. Jetex only have on 3" and I want on 2,75.
Do you know other one who make an exhaust system on my diameter?

Thanks a lot guys

[M_GORDON]

Nothing

[AndyP]

The Suspersprint system is 2.75" but it's expensive.

http://www.supersprint.com/ww-en/audi-80-b4-sedan-avant-22i-s2-turbo-quattro-230-hp.aspx

[Allanagtig]

How many HP can you get out of that 2,75" supersprint? 500-600hp?

[cardcrash]

Surely not??? 10-15hp?? Possibly a little more depending on what else is changed with it...

[M_GORDON]

I'm going about 380/400hp and I've the SuperS DP.
I'm affraid if a 3" catback system will be too big for me