Although I should just get the Milltek cat-back and do my own D/pipe and Metallic CAT, (I've moved recently and can barely fit the TIG welder into the garage cum rotting shed.... not to mention impending house extension, kids etc etc) so I've been looking at the easy route -
It turns out that Milltek now offer a 2.75 inch D/pipe and High flow CAT to complement their 3 inch system....
There are two commercially available full systems on the market :
Supersprint at a b@ll crushing £1351 ... and Milltek slightly more 'reasonable' (did I just say reasonable? ) at £1120, both from Starperformance
I know that the MIlltek cat back exhaust is held in high regard, but has anyone any experience of the Milltek D/pipe and CAT.
ALSO - Milltek require an order of 10 before they will produce a batch - so is anyone else interested ?
I'm aiming for 300bhp through efficiency as opposed to bigger turbo route - however, never underestimate the power of the 'darkside'
thoughts?
It turns out that Milltek now offer a 2.75 inch D/pipe and High flow CAT to complement their 3 inch system....
There are two commercially available full systems on the market :
Supersprint at a b@ll crushing £1351 ... and Milltek slightly more 'reasonable' (did I just say reasonable? ) at £1120, both from Starperformance
I know that the MIlltek cat back exhaust is held in high regard, but has anyone any experience of the Milltek D/pipe and CAT.
ALSO - Milltek require an order of 10 before they will produce a batch - so is anyone else interested ?
I'm aiming for 300bhp through efficiency as opposed to bigger turbo route - however, never underestimate the power of the 'darkside'
thoughts?
Comment