034 Inlet manifold

[s2dude]

Thanks Jon! It does seem as if the way the Ur's PAS pump is fitted is different to the ADU?

I attach 2 pics - the second one shows that the PAS pump is at least 1" too low to get to the fixing bracket with the manifold installed.

Why don't you just have a small adapter plate made up by an engineering shop??

Thats been done by someone with same problem b4 iirc

[DJones]

I just fabricated the bracket to hold the pump, you wont see another WR pump mounted like mine.... the WR pump (is i think) worse as the banjo fitting could not be in a worse place and only clears the TPS by about 5mm.... fortunately it all moves together so not an issue, but it is so tight i have to remove the inlet manifold to remove the belt, thought about removing the pully but it is to close to aux rad for that. But the fun is making it work

[GandalfS6]

Thanks Guys!

Javad replied that it can fit so I will go back to the drawing board tomorrow and see if I can make it fit!