Who wants Plasma Gauge faces form racing24de

[s2_bo]

Almost done with the switch conversion, Just have the temp controls and the window switches left to do, (The window switches are a nightmare to get open... any one tried this?)


The light level switch and heated seats were a PITA, took about 4 hours to get the blue light to flow through the Red plastic properly... all working now though.


IMG_6545.jpg

[Azman]

Looks the muts.

[Jas11n]

(The window switches are a nightmare to get open... any one tried this?)

I have, but it was at least 6 years ago now, and remember it being a little fiddly.
Try this info on 20v.org.

[AUDI9020V]

here i come to save the day,bit like mighty mouse but fatter.
i will do it tmorro.once i have found where to get a dizzy rotor from in york

[Skull]

To open them use very thin screwdrivers(three at least) and stab them between the black plastic and the brown. The black plastic is quite elastic so dont worry. remove the button itself firs. u have to use 3mm leds, cuz there is really no space. again, make them shine trough their a s s.

[s2_bo]

I have, but it was at least 6 years ago now, and remember it being a little fiddly.
Try this info on 20v.org.

Thank you!!
Ill have them blue in no time,
Have also done the Diff switch witch looks very nice in blue. The diff lock display next to the switch was a bit more tricky. i replaced all the bulbs with LEDs but the display is coated in a red paint on the inside, This stops all the glow getting through so they dont actually illuminate it at all .. was a bit of a wast of time... , anyway.

IMG_6514.jpg

[s2_bo]

To open them use very thin screwdrivers(three at least) and stab them between the black plastic and the brown. The black plastic is quite elastic so dont worry. remove the button itself firs. u have to use 3mm leds, cuz there is really no space. again, make them shine trough their a s s.

Cheers!!

Will give that a try..

[AUDI9020V]

use a craft knife(the one with a break off blade its thiner thats wot ive been using cos its nice n thin)

[s2_bo]

use a craft knife(the one with a break off blade its thiner thats wot ive been using cos its nice n thin)

:mischeif:

Nice one,

Ill try that, I did buy a set of those very small Flathead screwdrivers, they have done the trick so far but i didn't manage to the the window switches earlier as i didn't want to brake them, Will give this another go though.


Cheers Guys.

[s2_bo]

Will be back on the 22nd of April.. Group buy is continuing as planed...
cheers.
Bo

[s2_southwest]

any news while you were away Bo? thought id pester you with this thread seeing as your back lol

[Azman]

Just so you know Bo. Next week I dissapear for 5 weeks. Just in case you try to get in touch with me over this (if they are ready) I may be able to get a computer once or twice but that depends on how busy we are doing a setup.

Cheers

Aaron

[s2_bo]

Hi everyone,
Well im back. (As you know)
Ill try to have an update for you monday lunchtime.

Ill send the Germans an email in the morning and will give them a call if they have not replied by midday.

It should be coming on very nicely though ..

Cant wait to get these fitted ...

[s2_bo]

P.S. @ Aaron. Not to worry mate, I will keep a set for you that you can pay for when you get back.
Unless they are ready before you go...

Cheers

[USA CQ]

Anyone else replacing the S2 white gauge faces - am willing to buy a set. Email me at ken.cole@adelphia.com