Who wants Plasma Gauge faces form racing24de

[topsparky]

@ Toxcheap, That setup looks great. Thank you for your photos and well done one the needles

---

Re the boot gauges, this is in progress i should have an update by next week.

So far what we have come up with is:

Blue el./ Plasma gauges that match the colour tone and layout of the gauges they have already supplied.

and just last week they have produced a new product. -

Smoked plasma gauges.
I guess these look similar to the smoked AutoGuage ones when not illuminated but once they are illuminated they glow like the other gauges.

---

The Main Cluster Plasma gauges in red/orange is also possible, im finding out about minimum quantities and prices at the moment.

Will update soon.

Cheers.
Bo

did you find out if the do them for the urs4 bo
have seen some on ebay.de but they're in kph

[s2_bo]

Ok Little update

Ok,
So if been asking the Germans more questions and naturally they responded with lots of details.

Regarding Red/Orange Plasma Gauges in MPH

Not very likely at the moment, I would need to order a minimum of 40 Sets! That figure is way to high as there was only interest from 3 or 4 people.

Therefore for now, these will not be available. Not Via me anyway.





Regarding the URS4/S4 gauge faces.

Same scenario as above. Minimum of 40 sets would be required in order to start the production process.


sorry topsparky




Regarding the el. plasma boost gauges

Well these are defiantly available, i am waiting for some pictures and pricing at the moment.

They also have a slightly cheaper Smoked gauge. These looks like this


bluesmoke[1].JPG


Will update again once i get the prices.

Cheers.
Bo

[topsparky]

Ok,
So if been asking the Germans more questions and naturally they responded with lots of details.

Regarding Red/Orange Plasma Gauges in MPH

Not very likely at the moment, I would need to order a minimum of 40 Sets! That figure is way to high as there was only interest from 3 or 4 people.

Therefore for now, these will not be available. Not Via me anyway.





Regarding the URS4/S4 gauge faces.

Same scenario as above. Minimum of 40 sets would be required in order to start the production process.


sorry topsparky




Regarding the el. plasma boost gauges

Well these are defiantly available, i am waiting for some pictures and pricing at the moment.

They also have a slightly cheaper Smoked gauge. These looks like this


[ATTACH]11822[/ATTACH]


Will update again once i get the prices.

Cheers.
Bo

that looks sweet might be up for one of those
regarding urs4 gauges there's another company on german ebay that does them but speedo is in kph
would it be possible to buy just the speedo in mph
from you bo
cheers
deano

[s2_bo]

that looks sweet might be up for one of those
regarding urs4 gauges there's another company on german ebay that does them but speedo is in kph
would it be possible to buy just the speedo in mph
from you bo
cheers
deano

PM, on its way.

[Skull]

What about a boostah gauge in S2 look?

[zdo]

Can I buy just the carbon cluster insert and rings?

[s2_bo]

Can I buy just the carbon cluster insert and rings?

yes you can, pm on its way

[newsh]

Fitted my gauge faces yesterday and I must say I'm well pleased with the result
They are a bit distracting at first though as I've nearly had a couple of accidents from looking at them too much
The How-To that Bo has done was really helpful and I did the whole thing in an afternoon (well, a longish afternoon..) The gauges I took out were all in a bad way even the aux ones were starting to peel up round the edges. I just need a new or decent trip display now to finish the job and to repair some of my switches.
For the moment I've left the white bulbs in so the needles still light up in red but there is a bit of bleed through the large centre hole of the 2 main gauges. Is it one particular bulb that does the needle? I forgot to check before putting them back in.

[Davidsinclair05]

Hi Bo can you supply the carbon fasia and rings now?

[s2_bo]

@Newsh, Glad you got it all working well, Not sure witch bulbs control the needle illumination but i have a feeling you need all of them. I found the easiest way to stop the bleeding was to turn the illumination down a little that way the needs still light up.
Not enough to bleed a lot of light through the middle though.


@Davidsinclair05, Ill be restocking early Jan, so all parts will be available then. Inc rings, carbon and the new boost gauges

Cheers.
Bo

[andy e]

dash lights

plasma 1.jpgI used red bulbs which I think worked pretty good, now I just need a matching boost gauge.

Cheers Andy e

[andy e]

plasma 2.jpgAnd Aux gauges

Cheers Andy e

[topsparky]

[ATTACH]11857[/ATTACH]And Aux gauges

Cheers Andy e

that looks sweeeeet m8
bo please do some for the urs4

[newsh]

Yes, red bulbs is a move.

[Davidsinclair05]

Hi Bo Have you Restocked the rings and plasma gauge???