Extra gauges in place of the ashtray

[LHD_Kid]

I wanted to fit a combined EGT / AFR / fuel pressure gauge, as well as an eboost2
Both are 60mm round gauges and I didn't want to lose another centre vent...

Decided to try and build a bolt in solution in the ashtray area (can be put back to standard if needed) Zeitronix ZT-2 fitted, hole prepared for the eboost.

pretty happy with the results - out of eyeline too...


Sent from my SM-G928F using Tapatalk

Edit. really hate not being able to upload normal photos from the phone. Tapatalk is nasty and doesn't seem to keep it in the original orientation... also, only shows as thumbnail...

[Rikki Kitto]

Where you gonna put all your loose change now though

[Henkjan]

nice. any details on the manufactring of the item?

[LHD_Kid]

Loose change will now reside under my elbow in the centre part...

[LHD_Kid]

Ah... manufacturing, I made it from 6mm moisture resistant MDF. aluminium brackets and bolted through the sides... you can't see any of the fixings. It's quite tricky to get it fitting nicely, with quite a lot of wiring behind....

[LHD_Kid]

Ah... manufacturing, I made it from 6mm moisture resistant MDF. aluminium brackets and bolted through the sides... you can't see any of the fixings. It's quite tricky to get it fitting nicely, with quite a lot of wiring behind....

Piccies...

Sent from my SM-G928F using Tapatalk

[Henkjan]

good old elbowgrease